Skip to main content
The Hickory League

Official equipment

THL is played with four designated golf clubs and one target: the Tommy Stick, or T-Stick for short. This page separates what the rules confirm from the prototype that is still being designed and tested.

  • Ratified Confirmed in the rules
  • Proposed Prototype, not final
  • Pending ratification Still to be decided

The Tommy Stick

The THL Tommy Stick, the T-Stick for short and also called the T or the stick, is the sport's single target: a thick wooden shaft with a thinner crossbar passing through it near the top. Its design borrows from the sliding T-handle of a tommy bar: the crossbar is held captive but moves slightly. In Field Play, one T-Stick is used for all nine holes of a match. Rule 14.2

It does two jobs. It is the target: a legally played ball that touches any part of the wooden T closes the hole for that player, whether on the shaft, the crossbar, either end of the crossbar or the wooden connection area where the two meet. It does not need to move, fall or make a sound. And it shows where the match stands: a ribbon tied onto it identifies the round and the hole. Rule 14.14

The ball must hit the wooden stick itself. A ribbon, an identification marker, the ground anchor, a cup adapter or any other non-wooden equipment does not count on its own, and play continues. Rule 14.16

The THL T-Stick set for Round 1, hole 1 (match hole 1): red ribbon on the left.LeftMiddleRight
The dashed outline is the scoring target: the whole wooden T. The arrow marks the crossbar's slight, captive movement. Left and right are as seen by a player facing the T-Stick from the starting location.

Official specifications

THL has ratified the T-Stick's dimensions, anchor, handle and ribbons. They are approved ranges, not a finished manufacturing drawing: final tolerances come from prototype testing. Rule 14.4 Rule 14.7 Rule 14.27

T-Stick specifications
FeatureSpecificationStatus
Height36 to 48 inches above groundRatified
ShaftRounded wooden shaft, about 2 inches in diameterRatified
CrossbarWooden, 18 to 24 inches long and about 1 inch in diameterRatified
MaterialHickory preferredRatified
Crossbar fitSlight, observable movement in the bore; no excessive looseness, no binding, no detachment risk; captive in playRatified
AnchorIntegrated metal helical screw anchor, removable for repeated useRatified
InstallationBuilt-in installation handle; no separate toolRatified
RibbonsFabric, tied on with traditional knots; no fastenersRatified
Ribbon positionLeft arm, shaft towards the top, right arm: holes 1, 2 and 3Ratified
Ribbon colorRed, white and blue for rounds 1, 2 and 3Proposed
Finish and endsNatural wood finish, rounded crossbar endsProposed
MountingOne wooden upper assembly with interchangeable mountsProposed

Confirmed now: the crossbar must be structurally secure and stay captive during installation, play, transport and removal, so it can never slide out or become a projectile. The T-Stick must stay secured in its designated position during play. Rule 14.5 Rule 14.6

Engineering decisions still open

  • Exact bore dimensions and tolerances
  • How the crossbar is kept captive
  • Reinforcement around the bore
  • Anchor dimensions, depth and holding strength
  • Handle construction and placement
  • Installation torque limits
  • Whether a temporary crossbar lock is needed
  • Whether the crossbar produces the intended sound
  • Long-term wear and durability
  • Final manufacturing tolerances

Rule 14.8

The sound

Make it clack.Because the crossbar sits slightly loose in the shaft, a ball striking the T-Stick may set it moving against the surrounding wood. The design aims for a sound players will come to recognize: a thwack, then a clack.

Mounting systems

Field Play uses the T-Stick's own integrated helical anchor, screwed in with its built-in handle. For Course Play, a cup adapter is proposed, as part of one wooden upper assembly with interchangeable mounts; it is still in development. Rule 14.7 Rule 14.26

The THL T-Stick: a thick wooden shaft with a thinner crossbar passing through it, forming a T. It stands on a proposed screw-in ground anchor.
Field Play: ground anchorRatifiedAn integrated metal helical anchor turns into suitable soil with the built-in handle, holds the T-Stick upright and comes out after play. Its dimensions, depth and holding strength are still being tested. Rule 14.7
The THL T-Stick: a thick wooden shaft with a thinner crossbar passing through it, forming a T. It is seated in a golf cup through a proposed adapter.
Course Play: cup adapterProposedWith the course operator's permission, the flagstick comes out and the T-Stick sits in the existing cup. No drilling, digging or permanent change to the green. About Course Play

Ribbon identification

The T-Stick is marked with ribbons, not banners. Ribbons are tied straight onto the stick, with no screws, hooks or other hardware. Where the ribbon is tied shows the hole within the round: on the left arm of the crossbar for the first hole, on the shaft towards the top for the second, and on the right arm for the third. Only the current hole's ribbon is shown. Rule 14.10

Proposed: the ribbon's color shows the round: red for round 1, white for round 2 and blue for round 3, chosen to stand out on the course. Rule 14.11

How the T-Stick identifies each of the nine holes: the ribbon's position shows the hole within the round (left, middle, right), and its color shows the round (proposed: red, white, blue)
RoundRibbon color (proposed)Ribbon position and match hole
Round 1Red ribbon
  • Hole 1, left
  • Hole 2, middle
  • Hole 3, right
Round 2White ribbon
  • Hole 4, left
  • Hole 5, middle
  • Hole 6, right
Round 3Blue ribbon
  • Hole 7, left
  • Hole 8, middle
  • Hole 9, right

Ribbons are fabric, tied on with traditional knots; no fasteners are needed. The referee checks that every knot is secure, and no ribbon or knot may restrict the crossbar's movement or get in the way of safe play. Rule 14.13

Left and right are as seen by a player facing the T-Stick from the approved starting location. That orientation holds for the whole hole and is kept whenever the T-Stick is restored. Rule 14.12

Safety and testing

Before every hole, the referee looks the installed T-Stick over: upright, no visible anchor instability, not leaning, undamaged, properly installed and no other visible safety concern. Anything wrong is corrected before play. It is a visual check: no push, pull or deflection test is required. Rule 14.29

What testing must evaluate

  • Soil conditions
  • Rocky or compacted ground
  • Anchor depth
  • Underground utilities
  • Stability under golf-ball impacts
  • Resistance to tipping
  • Wood splitting
  • Crossbar retention under direct ball impact
  • Impact-induced crossbar movement and structural fatigue
  • Safe installation torque
  • Safe removal
  • Alternative bases where ground anchors cannot be installed

The general safety rules already apply: competition only at authorized venues, no simultaneous hitting, and a clear playing area before every shot. Rule 13.3

Clubs and tees

Each player carries exactly four clubs: one designated fourth club and three Playing Clubs. The fourth club's name and job depend on the format.

The fourth club in each format
FormatFourth clubUsed for
Field PlayEstablishing StickThe establishing drive-off only. Tees may be used only for establishing shots. Rule 2.3 Rule 3.2
Course PlayStart StickThe opening tee shot of each hole, from the blue tees. Rule 15.6

Learn the hickory-era clubs and try out a four-stick bag in Know your sticks.

Which clubs qualify

Shafts
Genuine wood only: authentic historical clubs, modern reproductions with wooden shafts, or restored vintage clubs. No steel, graphite or composite. Rule 2.4 Rule 2.5
Heads
Traditional-style wooden or metal heads, historical or faithful reproductions. No modern non-heritage designs. Rule 2.6
Grips
Original, leather or modern replacement grips, including rubber: safe, secure and in keeping with the club. Rule 2.7